Aquarium Systems LED bulb Proten

LEDs: 252
Lumens: 2400 lm
Channels: 2
LED Colour: 124pcs x white - 104pcs x pink - 24pcs x green

Extendable LED lighting fixture for freshwater aquariums.
• Mimics the "rippling" effect.
• Low energy consumption.
• Extendable support.
• Controller with two LED on/off channels.
• Device comes with mounting clips.
Adapter clips:
Compatible with T5 & T8 fittings.
Allows upgrading of the installation in the vast majority of existing aquarium lighting systems. (Included).
• Bluetooth controller compatible with Bluetooth dimming. (Not included)
Download the user manual

Danger:

To avoid the risk of electric shock, extra caution is required when using the equipment near water. Do not attempt to intervene yourself, seek advice from a qualified electrician and/or return the equipment to the store where you purchased it.

This Proten LED lighting system features a waterproof design, with an IP67 rating, but should only be used indoors. The Proten LED lamp is intended for aquariums.

Failure to follow these instructions may result in serious injury or property damage.

If you have any doubts regarding the installation or operation of this Proten LED lighting system, please consult a qualified and experienced electrician.

Attention:

To avoid injury, it is essential to follow these safety instructions:

- Unplug all aquarium devices connected to the mains before putting your hands in the water or servicing the Proten LED lamp.

- Always hold the Proten LED lamp when mounting it on the aquarium frame so that it cannot fall into the water.

- Regularly check the security of the connections and extendable legs of your Proten LED.

- Never look directly at the LEDs to avoid damaging your eyes.

- Be particularly careful when handling the Proten LED lamp.

- After a long period of use, the lamp surface may be hot. Turn it off and let it cool down.

- If the Proten LED lamp falls into the water, do not attempt to retrieve it, first unplug the power supply.

- Use the Proten LED lamp only for its intended purpose. Using fixtures and accessories from brands other than Aquarium Systems is not recommended and may prove dangerous for the aquarium.

- Never install or store the Proten LED lamp in places exposed to extreme weather conditions or temperatures below 0°C.

The flexible external cable or cord of this luminaire cannot be replaced: if the cable is damaged, the luminaire must be discarded.

Installation:

- Choose a suitable location near your power supply. Unplug the main power before installation and ensure that the power unit of the Proten LED lamp is in a well-ventilated area and away from other power sources: AC100-240V 50/60Hz.

- The Proten LED lamp can be mounted on the aquarium using the extendable legs and secured with the supplied accessories.

Electrical installation:

This device must be grounded, and the circuit should be protected by an appropriate fuse.

Before proceeding with the installation, ensure that the voltage and frequency ratings of the Proten LED lamp power supply match the mains power and choose a socket that is perfectly compatible with the mains.

Plug the Proten LED lamp into its power supply and make sure the switches are in the off position. Plug the Proten LED lamp's power supply into the mains. You can then switch on the switches.

Cleaning:

Unplug the mains supply and let the Proten LED lamp cool down before cleaning to avoid leaving marks.

Regular cleaning will enhance the appearance and performance of your Proten LED.

After allowing the lamp to cool, use a damp cloth to wipe only the main body of the Proten LED lamp, and carefully clean the plastic cover that protects the LEDs.