Camera trap with wi-fi and integrated solar panel

The PIE1060 camera trap offers you :

• virtually unlimited outdoor autonomy thanks to the built-in high-performance solar panel
• the ability to adjust settings and download photos and videos remotely thanks to the Wi-Fi function

Features of the PIE1060 Wi-Fi camera trap

• The Wi-Fi function allows you to remotely view, download or delete photos and videos using the free app (Android/iOS):
• view, download or delete recorded photos and videos
• take photos or videos
• modify product settings
• check power level and remaining memory capacity
• The device creates its own Wi-Fi network.
• The Wi-Fi function is activated via Bluetooth from a smartphone.
• Solar panel with built-in rechargeable lithium battery :
• 3.7 V - 4400 mAh
• The solar panel battery can be recharged using solar power or the USB cable supplied.
• The camera uses solar panel power first, before using battery power (if installed).
• Champ from vision: 80°.
• PIR sensor (motion/heat detector) :
• Detection angle: 60
• Detection distance: approx. 23 m
• Adjustable detection sensitivity: High | Medium | Low
• Flash Infrared :
• 36 invisible LEDs | Wavelength: 940 nm
• flash range: approx. 30 m
• Flash brightness-dependent infrared with automatic activation
• Infrared power flash adjustable: Auto | Medium | Low | OFF
• Trigger speed ultra rapide: approx. 0.3 seconds
• Capture modes :
• Photo: from 1 to 10 photos per trigger
• Video: programmable duration from 5 seconds to 3 minutes
• Photo + Video: a photo and then a video are taken each time the shutter is released
• Image sensor: 5 Mega Pixels color CMOS
• Photo resolution: 2 MP / 4 MP / 8 MP / 12 MP / 16 MP / 20 MP / 24 MP / 30 MP
• Programmable shutter speed: 1/15 | 1/20 | 1/30
• Photo file format: JPEG
• Video resolution: 368p / 480p / HD 720p / Full HD 1080p / Full HD 1296p / 2K
• Frames per second: 30 fps
• Audio recording in videos programmable (ON | OFF)
• Video file format : MPEG-4
• PIR detection mode: the camera takes photos and/or videos when the PIR sensor (motion/heat detector) detects activity in the area it covers
• Time Lapse mode: photos and/or videos are taken automatically at regular time intervals. In this mode, the PIR sensor is deactivated (no motion/heat detection).
• User-programmable operating ranges
• Photo/video timestamp: date, time, ambient temperature, moon phase, solar panel energy level, camera name
• Memory: max. 256 GB micro SD card, U1 class 10 minimum (not supplied). Micro SD cards can be purchased at any time from this site.
• Low-energy night capture: 2 possible settings
• No flash infrared: at night, if the energy level is too low, the camera will take photos/videos without triggering flash.
• No capture: at night, if the energy level is too low, the camera will no longer take photos or videos. It will only take them during the day.
• Programmable camera ID: identifies where and by which camera a photo was taken.
• Programmable password
• Programmable loop recording on memory card: if set to ON, when the memory card is full, the device continues to record photos/videos, deleting the oldest files.
• Padlock slot on camera body

Reliable and efficient

• 2-year warranty
• Weatherproof design (IP66)
• Trigger speed: approx. 0.3 seconds

PIE1060 Wi-Fi camera trap ergonomics

• Weight: 433 g (without batteries) | 525 g (with batteries)
• Dimensions: 143 x 107 x 95 mm
• Power supply: integrated solar panel and/or 4 AA alkaline batteries or 4 AA Ni-MH rechargeable batteries (not supplied) - batteries can be purchased at any time from this website.
• Standby time :
• outdoors: virtually unlimited, thanks to built-in solar panel
• indoors: approx. 18 months
• LCD screen: 2" color TFT display, 320 x 240 (RGB)
• Port mini USB 2.0 (file download + point solar panel charging)
• Name of free mobile application (iOS/Android): PIE1060

1 PIE1060 camera trap

1 USB cable

1 wall-mounting system

1 fastening strap nylon

1 user guide